45° Bend – Ø 80
2 segment 45° Bend, for offset details see dimensions tab.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
45° Bend with Door – Ø 80
2 segment 45° Bend with built in access door to enable sweeping of the flue pipe. This is only suitable for N1 pressure situations. For offset details see dimensions tab.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
90° Bend – Ø 80
3 segment 90° Bend, for offset details see dimensions tab.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
90° Bend with Door – Ø 80
3 segment 90° Bend with built in access door to enable sweeping of the flue pipe. This is only suitable for N1 pressure situations. For offset details see dimensions tab.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
90° Tee – Ø 80
The 90° Tee is usually installed when you are connecting the flue to the rear outlet of an appliance, a tee cap is sold separately for the base of the tee to allow sweeping access.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
90° Tee with Female Connector – Ø 80
The 90° Tee female connector is usually installed when you are connecting the flue to the rear outlet of an appliance, the branch of the tee has a female branch so it can fit over the out let spigot of the appliance. A tee cap is sold separately for the base of the tee to allow sweeping access.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Adaptor – Ø 80
Adaptor to SW
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Adjustable Pipe 300mm – Ø 80
The 300mm 1 Part Adjustable Pipe (usable length 250mm to 125mm) is designed to fit into an existing pipe or fitting it will slide into the female end and can be adjusted to achieve the desired Length. This is only suitable for N1 pressure situations. This item can be cut down but it is not advised, if the pipe is cut you must seal the exposed steel with high temp paint. This item comes with a clamp to secure the pipes together.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Adjustable Wall Support – Ø 80
Adjustable Wall Bracket 50mm to 80mm is designed to secure the connecting pipe to the wall to allow lateral support to the flue, this item is not a load bearing
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Connector Female – Female – Ø 80
Connector Female/Female is double ended change over pipe.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Connector Male – Male – Ø 80
Connector Male/Male is double ended change over pipe.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Finishing Plate – Rosette – Ø 80
90° Rosette Collar (Flat) is a decorative cover used to cover the entry hole in to a non combustible wall or register plate. Used vertical or horizontal at 90 deg.
APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.
CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
