135° Tee – Ø 80

195.00
The 135 Degree Tee is used when you need cleaning access at the base of the chimney It is the first piece installed on the external wall and allows for ease cleaning of the flue. ConvesaTWPro Fit System Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next. APPLICATION For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.

15° Bend – Ø 80

70.00
2 segment 15 degree bend ConvesaTWPro Fit System Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next. APPLICATION For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.

30° Bend – Ø 80

70.00
2 segment 30 degree bend ConvesaTWPro Fit System Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next. APPLICATION For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.

45° Bend – Ø 80

70.00
2 segment 45 degree bend ConvesaTWPro Fit System Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next. APPLICATION For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.

90° Bend – Ø 80

120.00
3 segment 90 degree bend ConvesaTWPro Fit System Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next. APPLICATION For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.

90° Tee – Ø 80

150.00
The 90 degree Tee is usually installed when you are connecting the flue to the rear outlet of the appliance ConvesaTWPro Fit System Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next. APPLICATION For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.

Tee Cap – Ø 80

27.00
Used to cap off the bottom or unused end of a 90/135 tee This is usually fitted to the bottom of a base support to allow easy removal for sweeping and access ConvesaTWPro Fit System Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next. APPLICATION For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.

Tee Cap cw Drain – Ø 80

42.00
Used to cap off the bottom or unused end of a 90/135 tee This is usually fitted to the bottom of a base support to allow easy removal for sweeping and access, This part includes a 10mm threaded drain to allow the connection of a drain pipe to carry away excess condense from the flue system. ConvesaTWPro Fit System Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next. APPLICATION For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances. CONSTRUCTION Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.