Pellet Flue
Click to enlarge
Pellet Flue
pellet flue
Adaptor - Ø 100 €25.00
Back to products
Pellet Flue
Reducer Ø 110mm Boiler to Ø 100 €20.00
AiFlues

Increaser – Ø 100 Male to Ø 125 Female

€40.00

Increaser – Ø 100 Male to Ø 125 Female

APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.

CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.

— OR  —

— OR  —

— OR  —

Add to wishlist
Category: Tags: ,
Description

INSTALLATION
You should not install a piece of AI-Pellet 100mm within 375mm from combustible material, e.g. wood, plaster boards, etc.
When installing make sure AI-Pellet is installed the correct way up – the smaller diameter should always be pointing downward.
This is because all the condensates will stay within the flue system and not pass to the outside of the AI-Pellet.
AI-Pellet is a friction fit joint so dose not require sealing of the joints for T600 high temperature installation.
For Pellet installation where positive pressure is present (P1 applications) seals must be places on every joint.
AI-Pellet has been designed to be cut, but care must be taken to cover any exposed steel with high temperature paint as this will rust over time.
When installing appropriate PPE should be worn at all times.

MAINTENANCE
You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
You can achieve this by installing AI-Pellet with an access doors at changes of direction.
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

 

 

 

Additional information
Color

Black
Brand

Warranty

2 Years
Material

Zero Carbon Steel
Steel Thickness

0.7mm
Coating

Powder Enamel
Coating Thickness

0.3mm
Approval

EN1856-2 T600 N1 Vm L8010 G375
Distance to combustible

375mm
CE Approved

Yes
Max Operating Temperature

600 Degrees C
Joint Method

Friction Fit / Seal
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Increaser – Ø 100 Male to Ø 125 Female”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
pellet-stoves 2

SHIPPING

  • Dispatch for delivery normally takes up to two weeks, depending on availability. It can take up to six weeks for special orders in some instances, if the lead time is longer than six weeks you will be informed by email of the estimated lead time for your goods.

DELIVERY

  • Your goods will be delivered by our Courier network or our In-House Delivery team.
  • Many Stoves are very heavy. There will be one driver who will help, but we suggest you have at least one other person with you to assist.
  • The driver will move the stove to the nearest wheel point, depending on access. The driver will be unable to move the goods across gravelled, or unfinished drives, through narrow openings, or up steps.
  • If you are unavailable when your palletized stove is delivered at your pre-booked time, then re-delivery charges may apply.

Please see our full Shipping & Delivery guide is our Terms & Conditions

User Manuals

Related products

flue pipe
Compare

Connector Female – Female – Ø 100

€23.50
Connector Female/Female is double ended change over pipe. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Pellet Flue
Compare

Reducer Ø 110mm Boiler to Ø 100

€20.00
Reducer Ø 110mm Boiler to Ø 100 APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Pellet Flue
Compare

90° Tee with Female Connector – Ø 80

€44.50
The 90° Tee female connector is usually installed when you are connecting the flue to the rear outlet of an appliance, the branch of the tee has a female branch so it can fit over the out let spigot of the appliance. A tee cap is sold separately for the base of the tee to allow sweeping access. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Pellet Flue
Compare

Reducer Ø 90mm Boiler to Ø 80

€19.50
Reducer Ø 90mm Boiler to Ø 80 APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Pellet Flue
Compare

Adjustable Pipe 300mm – Ø 80

€31.50
The 300mm 1 Part Adjustable Pipe (usable length 250mm to 125mm) is designed to fit into an existing pipe or fitting it will slide into the female end and can be adjusted to achieve the desired Length. This is only suitable for N1 pressure situations. This item can be cut down but it is not advised, if the pipe is cut you must seal the exposed steel with high temp paint. This item comes with a clamp to secure the pipes together. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

90° Bend – Ø 80

€33.00
3 segment 90° Bend, for offset details see dimensions tab. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Pellet Flue
Compare

Increaser – Ø 80 Male to Ø 125 Female

€48.75
Increaser - Ø 80 Male to Ø 125 Female APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Compare

Reducer – Ø 100 Male to Ø 80 Female

€52.50
Reducer Ø 100mm Male to Ø 80 Female APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view