Click to enlarge
pellet flue
Horizontal Terminal - Ø 80 €28.00
Back to products
pellet flue
Finishing Plate - Rosette - Ø 80 €19.45
AiFlues

Seal – Ø 80

€5.00

Joint seal used when a P1 (200 pascals)pressure situation is required in the flue. This item is for low temp pellet biomass installations only T200, and should not be used on high temp T600 applications .

APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C.
AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls.

CONSTRUCTION
AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.

— OR  —

— OR  —

— OR  —

Add to wishlist
Category: Tags: ,
Description

INSTALLATION
You should not install a piece of AI-Pellet 80mm within 375mm from combustible material, e.g. wood, plaster boards, etc.
When installing make sure AI-Pellet is installed the correct way up – the smaller diameter should always be pointing downward.
This is because all the condensates will stay within the flue system and not pass to the outside of the AI-Pellet.
AI-Pellet is a friction fit joint so dose not require sealing of the joints for T600 high temperature installation.
For Pellet installation where positive pressure is present (P1 applications) seals must be places on every joint.
AI-Pellet has been designed to be cut, but care must be taken to cover any exposed steel with high temperature paint as this will rust over time.
When installing appropriate PPE should be worn at all times.

MAINTENANCE
You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
You can achieve this by installing AI-Pellet with an access doors at changes of direction.
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

 

 

 

Additional information
Color

Black
Brand

Warranty

2 Years
Material

Zero Carbon Steel
Steel Thickness

0.7mm
Coating

Powder Enamel
Coating Thickness

0.3mm
Approval

EN1856-2 T600 N1 Vm L8010 G375
Distance to combustible

375mm
CE Approved

Yes
Max Operating Temperature

600 Degrees C
Joint Method

Friction Fit / Seal
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Seal – Ø 80”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
pellet-stoves 2

SHIPPING

  • Dispatch for delivery normally takes up to two weeks, depending on availability. It can take up to six weeks for special orders in some instances, if the lead time is longer than six weeks you will be informed by email of the estimated lead time for your goods.

DELIVERY

  • Your goods will be delivered by our Courier network or our In-House Delivery team.
  • Many Stoves are very heavy. There will be one driver who will help, but we suggest you have at least one other person with you to assist.
  • The driver will move the stove to the nearest wheel point, depending on access. The driver will be unable to move the goods across gravelled, or unfinished drives, through narrow openings, or up steps.
  • If you are unavailable when your palletized stove is delivered at your pre-booked time, then re-delivery charges may apply.

Please see our full Shipping & Delivery guide is our Terms & Conditions

User Manuals

Related products

flue pipe
Compare

Connector Female – Female – Ø 80

€22.50
Connector Female/Female is double ended change over pipe. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

45° Bend – Ø 80

€25.50
2 segment 45° Bend, for offset details see dimensions tab. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Compare

Reducer Ø 100mm Bolier to Ø 80

€25.00
Reducer Ø 100mm Bolier to Ø 80 APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

Rain Cap – Ø 80

€41.50
Rain Cap. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Pellet Flue
Compare

Reducer Ø 90mm Boiler to Ø 80

€19.50
Reducer Ø 90mm Boiler to Ø 80 APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

Pipe 1000mm – Ø 80

€30.00
Rigid fixed 1000mm pipe effective installed length of 960mm APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
Pellet Flue
Compare

Pipe with Door 1000mm – Ø 80

€51.50
Rigid fixed 1000mm pipe with built in access door to enable sweeping of the flue pipe. This is only suitable for N1 pressure situations. effective installed length of 945mm. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

Pipe with Door 500mm – Ø 80

€45.50
Rigid fixed 500mm pipe with built in access door to enable sweeping of the flue pipe. This is only suitable for N1 pressure situations. effective installed length of 445mm.
APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view