Click to enlarge
Firestop Plate - Ø 100 €68.00
Back to products
Storm Collar - Ø 100 €20.00
AiFlues

Ventilated Firestop Plate (WHITE) – Ø 100

€60.00

A Firestop Plate is used to allow the chimney to pass between floors, When you need the chimney to go through the ceiling on the ground floor through to the first floor.

The steel plate is designed to provide the appropriate distance between the flue and the adjacent flammable materials.

ConvesaTWPro Fit System
Super easy assembly, It takes one second and the one hand to put two parts together including attaching the locking band! The wall bands are embedded in to the pipe itself, so no protrusions between one section to the next.

APPLICATION
For use on solid fuel and gas/oil appliances. eg: Pellet Stoves, woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

Add to wishlist
Category: Tags: ,
Description

APPROVALS
TWPro is HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600 N1 W V2 L50040 G50.
EN1856-1 T200 W V2 L50040 O20.

INSTALLATION
TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.
Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).

 

 

 

Additional information
Brand

Warranty

25 Years
Material

Inner (316L Stainless Steel – 0.40mm thick)
Outer (304L Stainless Steel – 0.40mm thick)
Approval

HETAS / CE
Distance to combustible

50mm
CE Approved

Yes
Max Operating Temperature

600 Degrees C
Joint Method

Locking Band
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ventilated Firestop Plate (WHITE) – Ø 100”

Your email address will not be published. Required fields are marked *

Shipping & Delivery
pellet-stoves 2

SHIPPING

  • Dispatch for delivery normally takes up to two weeks, depending on availability. It can take up to six weeks for special orders in some instances, if the lead time is longer than six weeks you will be informed by email of the estimated lead time for your goods.

DELIVERY

  • Your goods will be delivered by our Courier network or our In-House Delivery team.
  • Many Stoves are very heavy. There will be one driver who will help, but we suggest you have at least one other person with you to assist.
  • The driver will move the stove to the nearest wheel point, depending on access. The driver will be unable to move the goods across gravelled, or unfinished drives, through narrow openings, or up steps.
  • If you are unavailable when your palletized stove is delivered at your pre-booked time, then re-delivery charges may apply.

Please see our full Shipping & Delivery guide is our Terms & Conditions

User Manuals

Related products

pellet flue
Compare

Pipe 500mm – Ø 80

€23.50
Rigid fixed 500mm pipe effective installed length of 460mm. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

90° Bend – Ø 80

€33.00
3 segment 90° Bend, for offset details see dimensions tab. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

Horizontal Terminal – Ø 80

€28.00
Horizontal Terminal - Ø 80 APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

Screw Support – Ø 80

€22.50
Screw Support Bracket designed to secure the connecting pipe to the wall to allow lateral support to the flue, this item is not a load bearing. The item is deigned to screw into the brick wall. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

Rain Cap – Ø 80

€41.50
Rain Cap. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

Pipe 1000mm – Ø 80

€30.00
Rigid fixed 1000mm pipe effective installed length of 960mm APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

90° Bend with Door – Ø 80

€41.50
3 segment 90° Bend with built in access door to enable sweeping of the flue pipe. This is only suitable for N1 pressure situations. For offset details see dimensions tab. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view
pellet flue
Compare

Tee Cap – Ø 80

€23.50
Tee cap is used to cap off the base of a tee. It comes complete with a joint clip and allows access for sweeping purposes. APPLICATION Suitable for gas, oil and solid fuel appliances with temperatures up to 600° C. AI-Pellet pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. AI-Pellet pipe should NOT be used to pass through ceilings or combustible walls. CONSTRUCTION AI-Pellet is a single skin connecting flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish. Suitable for gas, oil and solid fuel appliances with temperatures up to 600 degrees C, When fitted with a seal a P1 pressure rating can be achieved up to a working temperature of 200 degrees C T200.
Add to wishlist
Select options
Quick view